Front-Mounted
Ultrasonic Parking Space Detector Instruction Manual
1.Product
Introduction
The front-mounted parking space detector
integrates an ultrasonic probe and an indicator light. Installed
directly above the front of each parking space line, it collects
real-time data on the parking space status and controls the parking
space indicator light to display red, green, or blue according to
whether the space is occupied or vacant.
2.Product Features
1)The
parking detector and indicator light are integrated into one, which
greatly reduces the material cost and construction cost, and also
shortens the construction period;
2)
The two-way independent transceiver ultrasonic circuit design is
adopted, the detection area is large, and it works independently,
which greatly improves the life and reliability of the detector;
3)
The advanced intelligent learning anti-interference algorithm is
adopted to solve the interference of adjacent roads, side cars, and
cross-beams, and the detection accuracy rate is more than 99.9%;
4)
The parking status indicator light adopts a three-color
high-brightness LED lamp bead design, which has low power
consumption, long service life, wide viewing angle of the lamp bead,
and long viewing distance;
5)
The detector is installed on the bridge frame above each parking
space, effectively avoiding the obstruction of the column, and the
installation effect is more neat and beautiful.
6)
The whole has undergone strict static electricity, lightning strikes,
surges, group pulses and other tests to ensure reliable use under the
influence of harsh electrical environments;
7) The
detector adopts infrared settings to reduce the difficulty of
construction and shorten the construction period;
3.Technical
Parameters
|
Parameter
|
Specification
|
|
Product
Model
|
|
|
Operating
Voltage
|
DC
10~28V (rated 24V)
|
|
Detection
Accuracy
|
>99.9%
|
|
Power
Consumption
|
<2W
|
|
Operating
Temperature
|
-20
~ +65℃
|
|
Net
Weight
|
180g
|
|
Communication
Method
|
RS485
@9600bps
|
|
Communication
Distance
|
≤150m
|
|
Installation
Height
|
Vertical
2 ~ 3m (2.5m recommended)
|
|
Housing
Material
|
Gray
ABS engineering plastic
|
|
Horizontal
Position
|
Horizontal
0~1m (0.3~0.5m recommended)
|
|
Dimensions
|
Φ118mm
* 125mm
|
Figure
3.1 Structural Diagram of Front-Mounted Parking Space Detector (Unit:
mm)
4.Product
Installation
The
front-mounted ultrasonic detector is installed above the parking
space line, with a horizontal distance of 0~1 meter from the parking
space line (0.3~0.5 meters is recommended). The installation height
is between 2~3 meters, and the recommended installation height is 2.5
meters. The installation diagram of the detector is shown in Figure
4.1:
Figure
4.1 Installation Diagram of Front-Mounted Ultrasonic Parking Space
Detector
5.Usage and
Maintenance
1）Only
system maintenance personnel are allowed to operate system equipment.
Unauthorized operation may cause misoperation and system failures.
2）After
completing the system configuration files, please back them up
properly. This prevents irrecoverable loss in case of damage and
reduces maintenance workload.
3）When
replacing faulty equipment, disconnect the power supply first to
avoid damaging the equipment during operation.
4）If
the system fails to work normally, first check the power supply of
each device to see if it has been turned off by mistake.
